Polypropylene (PP) Pipes Market By Type (PP-H Pipe, PP-B Pipe, PP-R Pipe, and PP-RCT Pipe), By Application (Water Supply & Drainage, Chemical Industry, Industrial, Public Health Industry, and Others), Industry Trends, Estimation & Forecast, 2023-2030

Market Overview

Polypropylene (PP) Pipes are lightweight products used extensively in the HVAC industry due to its resistance to abrasive chemicals. The PP pipes are also widely used in corrosive, high-temperature waste disposal methods and industrial manufacturing processes that generally involve non-hydronic mechanical systems.

Polypropylene (PP) Pipes market was valued at 7.4 billion US$ in 2022 and is projected to reach 11.6 billion US$ by 2030, at a CAGR of 5.8% during the forecast period.

Market Determinants

Extensive product use in plumbing & piping of buildings and rising product demand for HVAC applications are the primary factors driving the market growth. The ability of PP pipes to remain inert to corrosive materials enable the product to use in high-purity working conditions found in electronic appliances manufacturing, food processing units, and water purifier systems, among several other sites. The flexibility of heat fusion methods applied for joining of PP pipes and its resistance to rust and chemical leakage has enhanced its use in the HVAC system, thereby influencing the growth of the market over the forecast period. However, volatility in raw material pricing and high costs of product maintenance might hamper the market growth. The fluctuations in the final manufacturing costs of the pipes and subsequent maintenance fees add up to the increased capital expenditure, hindering market growth prospects. The increasing consumer need for a supply of clear water in developing countries would provide lucrative opportunities for the market in the coming years. The extended use of PP pipes in the water supply to safeguard against contamination from toxic acids and chemicals offer new opportunities of product application and market expansion to key vendors.

Market Segmentation

The global Polypropylene (PP) Pipes market is mainly classified based on Type and Application. Type is further segmented into PP-H Pipe, PP-B Pipe, PP-R Pipe, and PP-RCT Pipe. By Application, the market is divided into Water Supply & Drainage, Chemical Industry, Industrial, Public Health Industry, and Others.

The PP-R pipe segment by Type holds a prominent market share in terms of production volume and value owing to widespread product use in residential plumbing setup, increasing PP-R pipe application in piping systems of newly constructed commercial high-rises, and improved product performance in high-pressure piping conditions.

In terms of volume, the public Health Industry Consumption is expected to witness substantial growth, reaching XX K Tons by 2030; growing at a CAGR of 2.1%over the forecast period owing to rising product application in plumbing & piping systems for infrastructural development of water supply and drainage systems, and relative protection against leakage of several corrosive chemicals and toxic materials through PP Pipes.

Regional Analysis

Based on geography, the global Polypropylene (PP) Pipes market is divided into North America, Europe, Asia-Pacific, South America, and Middle East & Africa. North America is further divided in the U.S., Canada, and Mexico, whereas Europe consists of the UK, Germany, France, Italy, and Rest of Europe. Asia-Pacific is segmented into India, China, Japan, South Korea, and Rest of Asia-Pacific. The South America region includes Brazil, Argentina, and the Rest of South America, while the Middle East & Africa is categorized into GCC Countries, Egypt, South Africa, and Rest of Middle East & Africa.

The region of Asia-Pacific holds a prominent share in terms of production volume and value owing to the development of expansive manufacturing facilities that cater to the increasing demands of the construction industry and presence of abundant raw materials and inexpensive labor force that is employed in the product manufacturing process industries. The secure transport & shipping of raw materials and finished goods into remote areas of the globe would further facilitate the growth of the regional market in the coming years.
 
Competitive landscape

The Polypropylene (PP) Pipes market is highly fragmented, with several global and regional players competing in the existing market scenario to expand business opportunities through rising product sales. The regional vendors offer consumers cost-effective products within close distances, ensuring steady sales to a local consumer base and intensifying market competitiveness.

Key players operating in the Polypropylene (PP) Pipes industry include IPS Flow Systems, Aquatherm, Vinidex, Georg Fischer AG, Aetna Plastics, AGRU Kunststofftechnik GmbH, SIMONA AG, Borealis, ISCO Industries, Resintech Berhad, Fusion Industries Limited, Borisov plastic product plant, Asahi Yukizai Corporation, and Shree Darshan Pipes.

The expansion of business opportunities through the extension of manufacturing facilities in remote areas and formation of strategic partnerships & collaborations are the primarily followed business strategies of the top players looking to capture significant market share in the coming years.

Polypropylene (PP) Pipes Market Key Segments

By Type
• PP-H Pipe
• PP-B Pipe
• PP-R Pipe
• PP-RCT Pipe

By Application
• Water Supply & Drainage
• Chemical Industry
• Industrial
• Public Health Industry
• Others

By Geography

• North America
o The U.S.
o Canada
o Mexico

• Europe
o U.K
o Germany
o France
o Italy
o Rest of Europe

• Asia Pacific
o India
o China
o Japan
o South Korea
o Rest of Asia Pacific

• South America
o Brazil
o Argentina
o Rest of South America

• Middle East & Africa
o GCC Countries
o Egypt
o South Africa
o Rest of Middle East & Africa

Key Global Polypropylene (PP) Pipes Industry Players

• IPS Flow Systems
• Aquatherm
• Vinidex
• Georg Fischer AG
• Aetna Plastics
• AGRU Kunststofftechnik GmbH
• SIMONA AG
• Borealis
• ISCO Industries
• Resintech Berhad
• Fusion Industries Limited
• Borisov plastic product plant
• Asahi Yukizai Corporation
• Shree Darshan Pipes

Table of Content

1. Market Introduction
1.1. Executive Summary
1.2. Market Definition
1.3. Market Scope

2. Research Methodology
2.1. Primary Research
2.2. Research Methodology
2.3. Assumptions & Exclusions
2.4. Secondary data sources

3. Polypropylene (PP) Pipes Market Overview
3.1. Report Segmentation & Scope
3.2. Key Market Trend
3.3. Drivers
3.3.1. Extensive product use in plumbing & piping of buildings
3.3.2. Rising product demand for HVAC applications
3.4. Restraints
3.4.1. Volatility in raw material pricing and high maintenance costs
3.5. Opportunity
3.5.1. Increasing consumer need for supply of clear water in developing countries
3.6. Porter’s Five Forces Analysis
3.6.1. Porter’s Five Forces Analysis
3.7. Market Share Analysis

4. Type Overview
4.1. Introduction
4.1.1. Market Size & Forecast
4.2. PP-H Pipe
4.2.1. Market Size & Forecast
4.3. PP-B Pipe
4.3.1. Market Size & Forecast
4.4. PP-R Pipe
4.4.1. Market Size & Forecast
4.5. PP-RCT Pipe
4.5.1. Market Size & Forecast

5. Application Overview
5.1. Introduction
5.1.1. Market Size & Forecast
5.2. Water Supply & Drainage
5.2.1. Market Size & Forecast
5.3. Chemical Industry
5.3.1. Market Size & Forecast
5.4. Industrial
5.4.1. Market Size & Forecast
5.5. Public Health Industry
5.5.1. Market Size & Forecast
5.6. Others
5.6.1. Market Size & Forecast

6. Polypropylene (PP) Pipes Market Regional Overview
6.1. Introduction
6.1.1. Market Size & Forecast
6.2. North America Polypropylene (PP) Pipes Market
6.2.1. North America Market Size & Forecast, By Country
6.2.2. North America Market Size & Forecast, By Type
6.2.3. North America Market Size & Forecast, By Application
6.2.4. U.S.
6.2.4.1. Market Size and Forecast
6.2.5. Canada
6.2.5.1. Market Size and Forecast
6.2.6. Mexico
6.2.6.1. Market Size and Forecast
6.3. Europe Polypropylene (PP) Pipes Market
6.3.1. Europe Market Size & Forecast, By Country
6.3.2. Europe Market Size & Forecast, By Type
6.3.3. Europe Market Size & Forecast, By Application
6.3.4. Germany
6.3.4.1. Market Size and Forecast
6.3.5. France
6.3.5.1. Market Size and Forecast
6.3.6. UK
6.3.6.1. Market Size and Forecast
6.3.7. Italy
6.3.7.1. Market Size and Forecast
6.3.8. Spain
6.3.8.1. Market Size and Forecast
6.3.9. Rest of Europe
6.3.9.1. Market Size and Forecast
6.4. Asia-Pacific Polypropylene (PP) Pipes Market
6.4.1. Asia-Pacific Market Size & Forecast, By Country
6.4.2. Asia-Pacific Market Size & Forecast, By Type
6.4.3. Asia-Pacific Market Size & Forecast, By Application
6.4.4. Japan
6.4.4.1. Market Size and Forecast
6.4.5. China
6.4.5.1. Market Size and Forecast
6.4.6. Australia
6.4.6.1. Market Size and Forecast
6.4.7. India
6.4.7.1. Market Size and Forecast
6.4.8. South Korea
6.4.8.1. Market Size and Forecast
6.4.9. Rest of Asia-Pacific
6.4.9.1. Market Size and Forecast
6.5. South America Polypropylene (PP) Pipes Market
6.5.1. South America Market Size & Forecast, By Country
6.5.2. South America Market Size & Forecast, By Type
6.5.3. South America Market Size & Forecast, By Application
6.5.4. Brazil
6.5.4.1. Market Size and Forecast
6.5.5. Argentina
6.5.5.1. Market Size and Forecast
6.5.6. Rest of South America
6.5.6.1. Market Size and Forecast
6.6. Middle East & Africa Polypropylene (PP) Pipes Market
6.6.1. Middle East & Africa Market Size & Forecast, By Country
6.6.2. Middle East & Africa Market Size & Forecast, By Type
6.6.3. Middle East & Africa Market Size & Forecast, By Application
6.6.4. GCC Countries
6.6.4.1. Market Size and Forecast
6.6.5. Egypt
6.6.5.1. Market Size and Forecast
6.6.6. South Africa
6.6.6.1. Market Size and Forecast
6.6.7. Rest of Middle East & Africa
6.6.7.1. Market Size and Forecast

7. Company Profile
7.1. IPS Flow Systems
7.1.1. Company Basic Information, Manufacturing Base, Sales Area and Its Competitors
7.1.2. IPS Flow Systems Product Category, Application, and Specification
7.1.3. IPS Flow Systems Financial Performance (2016-2018)
7.1.4. Main Business/Business Overview
7.2. Aquatherm
7.3. Vinidex
7.4. Georg Fischer AG
7.5. Aetna Plastics
7.6. AGRU Kunststofftechnik GmbH
7.7. SIMONA AG
7.8. Borealis
7.9. ISCO Industries
7.10. Resintech Berhad
7.11. Fusion Industries Limited
7.12. Borisov plastic product plant
7.13. Asahi Yukizai Corporation
7.14. Shree Darshan Pipes